Nokia Secret Codes ,Nokia Hacking Codes, Nokia Service Code

WARNING: Using secret codes on your own risk.

Nokia Secret Codes ,Nokia Hacking Codes, Nokia Service Code

IMEI Number
*#06# Cells Identity Code (IMEI = International Mobile Equipment Identity)

Software Version
*#0000# shows the software version

Signal Processing
*3370# - Enchanced full Rate Codec (EFR) activation. Automatically restart.
#3370# - Enchanced full Rate Codec (EFR) deactivation
*4720# - Half Rate Codec activation. It will automatically restart.
#4720# - Half Rate Codec deactivation
Enchanced Full Rate will give you much better sound quality when you enable it.



Nokia Secret Code for E-Series

Check software version and the release number of your device:
*#0000#

See WLAN MAC address:
*#62209526#

See Bluetooth MAC address:
*#2820#

To hard reset and restore to factory settings:
*#7370# (default lock code is 12345)

See IMEI (International Mobile Equipment Identity) number:
*#06#

Check number where calls are diverted:
*#61#

See Phone's life timer, type: #92702689#


Removing Virus-

Soft Reset
To soft reset the phone and reset phone settings type: *#7780#

Hard reset(Caution erase all data)-(Remove Virus
To hard reset and completely erase all data on the phone and restore it to factory settings, type *#7370#. You'll be asked for a lock code. The default Nokia lock code is 12345.


Sim Clock Stopping

*#746025625#
[*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.
It will tell you if it can be stopped or not.


Warrenty Menu

*#92702689# takes you to a secret menu with 6 choices:
[*#war0anty#]
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997).
3. Displays (if there) the date where the phone was purchased (MMYY).
4. Displays the date of the last repairment - if found (0000).
5. Makes you capable of transferring user data if you have the gear for it.
6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register.


Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx
1. Insert SIM card of different provider.
2. Turn on the phone and press the UP VOLUME key for 3 sec.
Then release it and the phone says PIN CODE?
3. Press the "C" key.
4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN#


Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^)
The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! )
1. Enter your menu
2. Select settings
3. Select security settings
4. Select closed user group
5. Select on
6. Enter 00000
7. Press ok
8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be de-activated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default.


Secret Codes for some Nokia models
Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#


Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on


Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version


Nokia 3210 Secret Codes
Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Secret of Windows Registry - Make Your PC faster , Hacking Windows Registry , Boost Your PC

Basic of Windows Registry - Make your PC faster

     It is a hierarchical database that stores information regarding the hardware, system software and application software, users preferences and system preferences. The hierarchy separates the machine information, users preferences and system preferences.
     During system startup, Windows uses the registry to get configuration data regarding the hardware, software and other peripherals that have been configured.
     Physically, the Registry information in XP is stored in multiple files in the \System32\Config folder of the operating system (or root) folder-usually C:\Windows or C:\WINNT. These files can not be edited directly, they have to be accessed through a Registry-editing program such as Regedit.exe or regedit32.exe.

Registry Hacks-

Given Registry is tested on Windows XP. Registry edit program can be accessed by following steps-

1. Open Run or Press Win Key + R to open run window
2. Type regedit and press Enter Key
3. Now navigate to desired value.

(Restart the system, after making change in registry value to take effect.)

(Note : You can also download free software for improving you PC performance from smparvez.125mb.com Click Here )

Improve Performance of your System by Changing Some registry value -


a. How to Load application faster


    Navigate to :
    HLM\SYSTEM\CurrentControlSet\SessionManager\Memory Management\PrefetchParameters

    The default value for the EnablePrefetcher setting is 3. Change this value to 5 to make application load
    faster. You can experiment with higher value up to  9 and see if you get a further improvement.

b. Optimization of boot file

     Navigate to :
     HLM\SOFTWARE\Microsoft\Dfrg\BootOptimizationFunction

     A setting called Enable under this key needs to be set to Y 
     This setting defragments the boot files.


c. Disable Thumbnail Caching (if you have low hard disk space do it now)

     Navigate to :
     HCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced

     Set the DWORD value DisableThumbnailCache to 1

d.  Delete the Startup Program from Startup Program  List

     It will increase the performance of system-

     Navigate to :
     HLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

      and to
      HCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

      All the programs  that load at boot time will be specified under these two keys. Delete all the program
      entries that you don't want to load at startup.

e.  Automatic Windows Refresh

      Navigate to :
      HLM\SYSTEM\CurrentControlSet\Control\Update

      Change the DWORD value called UpdateMode to 0. The default value is 1.

f. Close applicaton faster


    Navigate to :
    HCU\Control Panel\Desktop

    and to:
    HKEY_USERS\DEFAULT\Control Panel\Desktop

     The first is user specific and the second is system-wide.In both these locations, change the string value
     called  AutoEndTasks to 1 to kill the application immediately , or 0 to prompt for user action.
     WaitToKillAppTimeout controls the default time in milliseconds, before killing the application. Reduce
     this time to further speed up the process.